Skip to main content

5 November 2026

Guide to Landlord Electrical Duties in England

Guide to Landlord Electrical Duties in England

A rental property can look ready for a new tenant while its electrical installation tells a different story. A dated consumer unit, damaged socket, overloaded extension lead or missing test record can create a genuine safety risk and leave a landlord exposed if something goes wrong. This guide to landlord electrical duties sets out the practical responsibilities for private rented homes in England, including inspections, repairs and the paperwork that proves the property has been properly managed.

The core electrical duty for landlords

For most privately rented properties in England, landlords must ensure that the fixed electrical installation is inspected and tested at least every five years by a qualified and competent person. This requirement comes from the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020.

The fixed installation includes the consumer unit or fuse board, wiring, sockets, switches, light fittings and other permanently connected electrical equipment. It is not limited to obvious faults. Electrical deterioration often happens out of sight, particularly in older properties, houses that have been altered over time, or homes with a history of DIY work.

The inspection produces an Electrical Installation Condition Report, commonly called an EICR. This is not simply a pass-or-fail certificate. It records the condition of the installation, identifies observed damage or non-compliance, and states whether the installation is satisfactory for continued use.

A satisfactory EICR gives landlords an evidence trail that the installation has been assessed. An unsatisfactory report is not a reason to ignore the issue or postpone a tenancy. It is a clear prompt to arrange remedial work within the required timeframe.

What an EICR checks in a rented property

An EICR involves inspection and testing of the electrical installation rather than a quick visual check. The electrician will assess whether the system is safe, suitably protected and in a condition appropriate for continued use.

This usually includes the earthing and bonding arrangements, condition of the consumer unit, circuit protection, sockets and switches, signs of overheating, the presence and operation of RCD protection, and whether earlier alterations have been completed safely. The extent of testing depends on the property and access available on the day.

The report may use observation codes to explain the findings. A C1 observation means danger is present and urgent action is needed. C2 means potentially dangerous work requires improvement, while FI means further investigation is needed without delay. Any of these observations will normally result in an unsatisfactory outcome.

Older installations are not automatically unsafe simply because they do not meet every current standard. However, a landlord must act where the inspection identifies danger, potential danger or a need for further investigation. This is why the report should be reviewed properly, rather than filed away without arranging the work it recommends.

EICR records landlords need to provide

The report itself is as important as the inspection. Landlords in England must provide a copy of the EICR to existing tenants within 28 days of the inspection and to a new tenant before they occupy the property. If a prospective tenant asks for a copy, it must be provided within 28 days of the request.

The local authority can also request the report. In that case, it must be supplied within seven days. Landlords should retain a copy until the next inspection is due, which means keeping records for at least five years.

Good record keeping is particularly valuable for landlords with several properties, letting agents managing changeovers, or owners dealing with a sale or insurance query. Keep the EICR with any remedial certificates, invoices, photographs where relevant and details of who carried out the work. A clear file can prevent a routine compliance question becoming a time-consuming dispute.

When remedial electrical work must be completed

If the EICR identifies remedial work or further investigation, it must be completed within 28 days, or sooner if the report specifies a shorter period. Once the work is complete, the landlord must obtain written confirmation that the issue has been resolved or that further investigation has been carried out.

This written confirmation must be given to the tenant and, if requested, the local authority within 28 days of the work being completed. In practical terms, landlords should not wait until the end of the 28-day period to start making arrangements. Access, parts and the scale of the repair can all affect timescales.

Some remedial work is straightforward, such as replacing damaged accessories or correcting an unsafe connection. Other findings may point to a larger project, including consumer unit upgrades, circuit alterations or partial rewiring. The right solution depends on the report, the property’s age and layout, and the condition of the existing installation.

A qualified electrician should explain what is necessary for safety and compliance, what work is advisable for future reliability, and what certification will be issued once the work is finished. That distinction helps landlords budget sensibly without overlooking urgent items.

Landlord electrical duties between inspections

The five-year inspection interval is not a licence to take no action in between. Landlords still have a general duty to keep the electrical installation safe throughout the tenancy. Responding quickly to reports of tripping circuits, burning smells, loose sockets, flickering lights or electric shocks is essential.

Tenants should know how to report faults and should never be asked to keep using equipment that appears unsafe. A repeatedly tripping circuit may be caused by an appliance, but it can also indicate a fault in the fixed wiring or an overloaded circuit. It needs proper assessment rather than a temporary workaround.

Landlords should also be careful when making improvements. Kitchen refits, bathroom alterations, extensions, garden rooms and EV charger installations can all involve electrical work. Depending on the work, certification and notification requirements may apply. Using an approved contractor gives you a clear route to the relevant documentation and helps ensure alterations integrate safely with the existing installation.

Fixed electrics, supplied appliances and tenant belongings

The EICR requirement applies to the fixed electrical installation. Portable appliances are different. If a landlord supplies items such as a washing machine, fridge, kettle or television, they must be safe, but Portable Appliance Testing is not a blanket legal requirement for every appliance in every tenancy.

PAT can still be a sensible management measure, especially in furnished lets, HMOs and properties with regularly replaced or heavily used equipment. Visual checks are useful too. Damaged leads, cracked plugs, loose cable grips and signs of overheating should be dealt with promptly.

Tenants are usually responsible for appliances they bring into the property, but a landlord cannot rely on that distinction where the fixed installation is at fault. Clear inventories, sensible tenancy information and a responsive approach to reported defects help avoid confusion.

Choosing the right electrician and certificate

Landlords need more than an electrician who can identify a fault. They need a contractor able to inspect, test, explain the findings and issue the correct paperwork. Look for relevant qualifications, experience in rental properties and recognised approval such as NICEIC registration.

Ask what the visit includes, whether testing access has been allowed for, what happens if faults are found, and when the EICR or remedial certification will be issued. A cheap inspection that does not provide clear documentation can create more work later.

For landlords and managing agents across Bristol, Bath and Newport, CRS Electrical provides NICEIC approved inspection, testing and remedial electrical work for domestic properties. A planned EICR can be combined with practical advice on older consumer units, damaged accessories, additional sockets or upcoming improvement work, helping owners deal with issues in a coordinated way.

A note for landlords with property in Wales

This article focuses on private rented homes in England. Landlords with property in Newport or elsewhere in Wales are subject to the Welsh rental framework, including fitness for human habitation requirements. Electrical inspection duties are similar in purpose, but paperwork, terminology and wider landlord obligations can differ.

If you manage properties on both sides of the border, do not assume one process covers every address. Confirm the applicable requirements for each property and keep separate, up-to-date compliance records.

Electrical safety is easiest to manage when it is planned before a tenancy starts, not rushed after a reportable fault or a local authority request. Booking inspections in good time, acting on observations promptly and keeping certificates together gives landlords a safer property and tenants greater confidence in the place they call home.

Ready to get started? Get a free, no-obligation quote.

Tell us about your job and we will get back to you within one working day.