Skip to main content

24 October 2026

How Much Does House Rewiring Cost in 2026?

How Much Does House Rewiring Cost in 2026?

A rewire is one of the biggest electrical investments a property owner can make, but it is also work that should not be priced on guesswork alone. If you are asking, “how much does house rewiring cost?”, the useful answer is that the size, age, layout and condition of the property matter as much as the number of sockets you can see.

For a typical three-bedroom home in Bristol, Bath or Newport, a full rewire will commonly cost several thousand pounds. The final figure should cover safe installation, testing, certification and making good where agreed - not simply replacing visible sockets and switches.

How Much Does House Rewiring Cost?

As a broad guide, a full rewire for a standard occupied house may fall within the following ranges, depending on access, specification and the amount of remedial building work required.

| Property type | Typical full rewire cost range | | --- | --- | | One-bedroom flat | £3,500 to £5,500 | | Two-bedroom house or flat | £4,500 to £7,000 | | Three-bedroom house | £6,000 to £9,000 | | Four-bedroom or larger house | £8,000 to £12,000+ |

These are planning figures, not fixed prices. A period property in Bath with solid walls, high ceilings and restricted access may cost more than a similar-sized modern house. Equally, a property being fully renovated before plastering and decorating can be more straightforward, and therefore less expensive, than an occupied home where furniture, finished surfaces and daily routines must be protected.

VAT, decorative repairs and specialist items may or may not be included in an initial comparison price. A written quotation should make this clear before work begins.

What Is Included in a Full House Rewire?

A proper full rewire normally involves replacing the electrical circuits and cabling throughout the property, together with the consumer unit, sockets, switches, lighting connections and required protective devices. It also includes electrical testing once the installation is complete.

The electrician will assess the existing installation, plan the new circuit layout and install cabling to current wiring regulations. In most homes, the work also includes modern RCD or RCBO protection at the consumer unit, earthing and bonding checks, smoke alarm connections where required by the design, and an Electrical Installation Certificate on completion.

A rewire does not automatically include every non-electrical trade. Chasing cables into walls, lifting floors and accessing lofts can affect plaster, paintwork, tiles, carpets and joinery. Some electrical contractors include a basic making-good allowance, while others price this separately or leave final plastering and decoration to the customer’s chosen tradespeople. This is not necessarily a problem, provided the scope is clear.

The Main Factors That Change Rewiring Costs

The number of rooms is only part of the calculation. Electrical demand and how easily cables can be installed often have a greater effect on the quote.

Access and Property Construction

Modern stud walls and accessible floor voids generally allow cables to be run with less disruption. Solid brick walls, lath-and-plaster finishes, concrete floors and limited loft access can take more labour. Older Bristol terraces, converted flats and listed or character properties often need more careful planning to protect original features.

An empty property is usually easier to rewire than one that is occupied. Where residents remain in the home, electricians may need to complete the project in stages, keep essential circuits live where practical and work around furniture. This adds time but can be the right approach when moving out is not possible.

Number of Circuits and Electrical Points

A basic like-for-like layout costs less than a modern installation designed around current living. Kitchens commonly need several dedicated circuits for appliances, while home offices, utility rooms, electric showers and outbuildings all increase the scope.

Extra socket outlets can be a sensible investment during a rewire. Adding enough sockets where they are actually needed reduces the reliance on extension leads and multi-way adaptors later. Lighting choices also matter: downlights, feature lighting, dimmers, bathroom fittings and external lighting all require suitable design and installation.

Consumer Unit and Safety Upgrades

Most full rewires involve fitting a new consumer unit because older fuse boards are unlikely to provide the protection expected of a new installation. The price will depend on the number of circuits, whether surge protection is needed and the chosen arrangement of RCDs or RCBOs.

The electrician may also identify issues with the incoming supply, earthing arrangement or bonding to gas and water services. These are safety-critical matters, not optional extras. In some cases, work from the electricity network operator is needed before the installation can be completed, particularly where the supply capacity is unsuitable for planned additions.

Future Plans for EV Charging and Solar

A rewire is the best time to prepare a property for an electric vehicle charger, solar PV, battery storage or an all-electric heating upgrade. Installing suitable routes, spare capacity and correctly sized consumer-unit provision during major works can avoid reopening finished walls in the future.

It does not always make financial sense to install every upgrade immediately. However, discussing likely future demand with your electrician can make the rewiring design more practical and more cost-effective over time.

Full Rewire or Partial Rewire?

Not every property needs a full rewire. A partial rewire may be appropriate where an extension, loft conversion, new kitchen or damaged circuit needs new cabling, while the rest of the installation has been properly tested and found satisfactory.

A partial rewire can range from around £1,500 for limited works to £5,000 or more for a large kitchen, extension or substantial section of a house. The risk is treating a wider problem as a small repair. If cable insulation is deteriorating, circuits are poorly installed, the consumer unit is outdated or testing reveals defects across the property, piecemeal work may only delay a necessary full rewire.

An Electrical Installation Condition Report, often called an EICR, is useful when the condition of the existing wiring is unclear. It does not provide a rewire price by itself, but it gives a qualified electrician evidence on which to advise whether repair, partial replacement or a full rewire is appropriate.

Why the Cheapest Rewire Quote May Cost More Later

Rewiring affects every part of a property, so an unusually low quote deserves careful examination. It may exclude testing, certification, consumer-unit upgrades, chasing, waste removal, materials, making good or VAT. It may also be based on a limited number of sockets and lights that does not reflect how you use the home.

For landlords, certification and documented compliance are especially important. For homeowners, the same paperwork provides confidence for insurance, future sale discussions and any later electrical alterations. Commercial properties have their own requirements, particularly where work must be planned around operations, tenants or public access.

Choose an NICEIC approved electrician who can explain the proposed work in plain language, confirm what is included and provide the appropriate certification. A detailed quote is more valuable than a quick estimate because it lets you compare scope as well as price.

How to Get an Accurate Rewire Quote

The most reliable quotation follows a site visit. The electrician needs to inspect the consumer unit, assess cable routes, look at access under floors and in loft spaces, and understand the property’s intended use. Photos can help with an early indication, but they rarely show concealed construction or existing electrical defects.

Before requesting quotes, decide whether you are keeping the current room layout, adding a kitchen or bathroom, creating a home office, installing an EV charger or preparing for solar. Mention any planned renovation work and whether the property will be empty. These details help the electrician price the job accurately rather than add provisional allowances later.

Ask whether the quote includes materials, consumer unit, testing, certification, waste removal, smoke alarms, temporary power arrangements and reinstatement. You should also confirm the expected programme of works, as a typical full rewire can take around five to ten working days, depending on the property and the level of disruption involved.

A rewire should leave you with more than new switches and sockets. It should give your property a safe, tested electrical installation that suits the way you live or manage it now, with capacity for the improvements you expect to make next. For a clear local assessment and a free quote, CRS Electrical can inspect the property and set out the work required before you commit.

Ready to get started? Get a free, no-obligation quote.

Tell us about your job and we will get back to you within one working day.